DH622 Villa Test Guide
- Wilbur
Quick Test
Quick test for simple villa application
Test with one door station first, before connecting with more than 1DS you shall read
A 5min video about the testing:
Wiring
Device
Door Station | Accessory | Monitor |
|---|---|---|
DH622 | PC7D/PC9 | DH470/DH482 |
Power up
Power up all devices.
Test Case 1 - Setup/Calling
1.1 Onsite tool
On one of the monitors, tap “Settings” → “Installer” → “Onsite Tool” → “6666666” by default
If all devices are in default ((new out of the box) a menu will show as below:
1.2 Configure one-button calling to all (one family)
Tap “Onefamily.” The monitor address will be IM1, and IM1(2) means salve. The dashboard menu will also flash.
Make a call
Press the lowest button, both monitors shall ring.
1.3 Configure multi-button calling to all(Multi family)
Clear and set up for multi-button calling
After test point 1.2 the address has been set up, first to clear the address settings. Tap “clear” and wait for a second tap “Multifamily”
Find where is the device
Make a call
Press the lowest button, both monitors shall ring.
Button1 - IM1, Button2 - IM2.
Test Case 2 - Cards
2.1 Add cards
On one of the monitors, tap “Settings” → “Card manager” → select door station.
The menu as below, and tap “UserCard Add” to add a card：
Add card in 2 ways:
Input card number
Tap the card when the DH622 nameplate flahes.
2.2 Test cards
Tap the cards just added to see if the card works
2.3 Delete cards
Delete by tapping cards/inputting cards number
Delete by list
Tap “UserCard List” and tap the card in the list that needs to be deleted, tap again to confirm the deletion.
Test Case 3 - Lock/Remote configures
3.1 Remote configure
Remote configure DH622 lock(relay) output with below
On one of the monitors, tap “Settings” → “Installer” → “Onsite Tool” → tap the setting icon below the door station
3.2 Remote configure lock/relay parameters
In the “Parameter” modify RL_1_MODE and RL_1_TIMER and release the door lock once (by exit button or monitor unlock) to apply.
3.3 Connect to your lock to see if that works
Notice when using the door station internal power the lock, the lock shall be 12Vdc <300mA.
Test Case 4 - App
4.1 Connect to Wi-Fi
On the monitor, tap “Settings” → “Manager”, tap “Wi-Fi switch” to ON, and select the Wi-Fi name in the list, input the password, and connect.
4.2 Download the APP and scan the QR code
Search “VDP connect”
Use “VDP connect” to scan the QR code
Setups divert the call to APP
4.3 Make a call and test.
Make a call from the door station, and receive calls on the APP.