DH APT System Commissioning
- Wilbur
Analytics
Commissioning Example ( One Door Station)
Configure for system 1 DS and 16 Monitors for the apartment as below
The procedure is the same up to 64 monitors, only the wiring is different for 16/32/48/64 has the same configure process, the page takes 4 monitors as an example.
Commissioning
1. Configure MAT on the door station
Power on the door station first and create a MAT file.
MAT ( Monitor Architecture Table ) is a file storage for all monitor address and name information.
On DH850P, unlock with code “2288”(default installer password) into the installer setting mode.
Tap “Settings” → “System” → “RES settings” → “APT MAT settings” → “MAT create new” to create a new MAT file.
Input “16” for the “IM End address” to create a 16 monitor list.
2. Install monitors and configure address via MAT
On the monitor, tap “Settings” → “Installer” → “Call_Nbr” → default install password “66666666”.
Chang the system type from DH-SS(default) to DH-APT
Select the address from the list.
3. Check installation via MAT check online
To check the installation statutes, Tap “Settings” → “System” → “RES settings” → “APT MAT settings” → “MAT check online”
See details report in “MAT view report”
4. Change lock parameters
5. Replace the main menu picture from the SD card
Tap the edit icon in the installer mode. and tap the image box area to replace the image or modify the welcome message.
Image cropper as below:
6. Manage Cards
To manager the card, Tap “Settings” → “Manager” → “Card settings” → “Card editor”.