Installer - Call_Nbr
- Wilbur
Menu
Default installer password “66666666”
For using door station DH622/DH611 only, the system type is DH-SS.
For using door station DH850/DH821 only, the system type is DH-APT.
Settings (DH-SS)
Menu information
Item | Value |
|---|---|
System type | Setup the system type for the monitor, DH-SS or DH-APT |
Device_Addr | Monitor address, 2 digits(in DH-SS 01-08) |
MS_Nbr | Master/slave address setup |
Name | Monitor name |
Local_Nbr | Extension call numbers |
Manually setup monitor address in DH-SS
Tap the “Device_Addr” in the menu and input the 2 digital room numbers.
Tap the “MS_Nbr” in the menu and input MS_Nbr to set up master and slave settings.
01: Master
02~04: Slave
For DH-SS automatically setup address is supported in DH-SS onsite tool
Settings (DH-APT)
Menu information
Item | Value |
|---|---|
System type | Setup the system type for the monitor, DH-SS or DH-APT |
RM_Addr | Monitor address, 2 digits |
MS_Nbr | Master/slave address setup |
Name | Monitor name |
Local_Nbr | Extension call number |
Global_Nbr | Extension call numbers. Reserved. |
Update Call_Nbr from RES | After configure RM_Addr, get Call_Nbr information form door station MAT according to configured RM_Addr (if has) |
Restore Call_Nbr default | Release the address setup, and set to default settings. |
Setup monitor address in DH-APT
Room address
Tap the “RM_Nbr” in the menu and input the 2 digital room numbers.
If the system has configured a MAT via the door station
After tapping “RM_Nbr” instead, the monitor will display the selectable MAT.
Tap “Input,” to manually input an address,
or select one from the MAT.
Master and Salve settings.
Tap the “MS_Nbr” in the menu and input the 2 digital room numbers.
If the system has configured a MAT via the door station
If MAT has been configured in the system, tap “MS_Nbr” will request to input the room number, and then select a Master/Slave address.