/
How to set the device address
How to set the device address
Use the menu to set the device address instead of the DIP dialing mode, the steps as below:
main menu → Settings → Installer → Cal_Nbr → input password “66666666” → setup the the device address by input number 01~32.
DX2 only can be set as Master monitor , other DT monitors can be set as Slaver monitors in system.
2. The differences between DX1 and DX2 on device address as below:
DX2 ( By menu input ) | DX1 ( By DIP6 ) |
---|---|
32 | 00 |
01 | 01 |
02 | 02 |
……. | …… |
31 | 31 |
, multiple selections available,
Related content
How to view network connection/SIP/Scene status
How to view network connection/SIP/Scene status
Read with this
Hardware Upgrades
Hardware Upgrades
Read with this
How to use the QUAD menu
How to use the QUAD menu
Read with this
How to set up a Wi-Fi connection
How to set up a Wi-Fi connection
Read with this
Instruction of BurnTool updated (use for DX2 devices)
Instruction of BurnTool updated (use for DX2 devices)
Read with this
UI improvements of DX2
UI improvements of DX2
Read with this