Handset Extension: IX-DJ4/IX-401 work with IX471S

Owned by CALO LIU (Unlicensed)
Last updated: Dec 14, 2021 by Annie Wu
2 min read

IX-401

Requirments:

 

How to make it work :

 

1 . Connect IX401 to IX471 as above and installed with bracket.

2 . Do settings on monitor as below , and choose  “Handle ”

“Settings” -> “Installer” -> “Parameter” -> “Others” -> “Z port Mode”: “ Handle ”

3 . Power off and wait 20s, and power on the unit to apply the change

 

Notes :

  • Once connecting IX401, alarm and audio handset function are not available

  • If IX401 has to be put at the right side of monitor, no need to use special bracket.

 

IX-DJ4

Thanks to this feature, we have an economic solution to slaver unit, this audio handset can connect with any of the monitor and work with it in parallel

 

Requirments:

 

How to make it works :

 

1 . connect IX-DJ4 to IX471 as above , cable less than 10 meters.

2 . do settings on monitor as below , and choose  “ DJ4A ”

“Settings” -> “Installer” -> “Parameter” -> “Others” -> “Z port Mode”: “ DJ4A ”

3 . Power off and wait 20s, and power on the unit to apply the change

 

Notes :

  • Once connecting IX-DJ4, alarm and handset DJ401 function are not available

  • One monitor only can connect one IX-DJ4