DX821 Installer Setup via XD-APP

It is to set DX821 use AUTO/DHCP (default), or STATIC IP address

Usage 1: some system must require to use STATIC IP address

Usage 2: match with point 4. “IPC Auto Config”, to add IP cameras (with Static IP address) to the sytem

First, input name and password of a Wi-Fi, tap “Save”, then DX821 will connect to this Wi-Fi and go to cloud automatically.
Reopen the APP, could also log in and configure DX821 by this APP.

Note: the name and password of Wi-Fi should not use special symbols or punctuation.

Input name and passwords (could be self-defined) of a IP camera, then this IPC will be added to DX821

Adding User Card: tap this, then you can swipe uncredited keyfobs to make them as User Cards

Deleting User Card: tap this, then you can swipe User Cards to delete

Exiting To Normal: Exit and go back standby mode

Authorize Master Cards: First swipe is MASTER ADD CARD, second swipe is MASTER DELETE CARDJ

Input upgrade server and code to update DX821 firmware officially

Input or change the unlock password, unlock mode, unlock time, for LOCK1 and LOCK2, at last must tap “Save“ to activate

To check if indoor monitors are connected to DX821 or not (Correspoding button LED of 821/M4 will be on).

Function 1: Could change the login password of DX821

Function 2: Power on, DX821 will connect to Cloud automatically (could enable or disable)

Function 3: Default hotspot name and password could be changed