IX850 Manage Menu
- CALO LIU (Unlicensed)
A password protected menu for setup password, access card and non-essential settings.
Manager menu on IX850
Installer access password and how to get into installer mode.
Default Installer password: 88888888
Manager Menu
In standby, tap “Unlock” and Input “9902 + Installer password” in default is “990288888888”.
IX850 display below menu if password is correct, the menu is manager menu
In manager menu there are:
Date and time
Language
Sip config
About
Unlock code setting
Access card
Change Manager PWD
Change manager password
When door station is in “Manager menu”: 2nd page “Change Manager password” this requires old manager password.
Manager and Installer Menu difference
Installer has all setups in manager menu, but should be aware of below settings:
Settings | Manager | Installer | Mark |
Call_Nbr |
| • | “Name” is also Call_Nbr setup |
IP Address |
| • |
|
Display language | • | • | Menu language |
Voice language |
| • | Voice promote language |
Lock setup |
| • | Release time and type |
Card and password | • | • |
|
“Manager” password | • |
| Modify manager password |
Installer Access Card
Using installer access card could directly get into installer menu without input installer password, simply tap installer access card on card reader.
Manager Access Card
Refer “Access Card” to see how to setup cards.
Cards register under RM_Nbr = 9902 regard as installer access card. Add cards on door station while fill in room address, tap “By input” and input “9902”
How to use installer access card:
Tap card associate with RM_Nbr = 9902 will jump to installer mode.
Manage installer access cards:
Same as manage cards, in “Access cards” -> “View card” menu, tap current installer card, or input RM_Nbr = 9902 to check current installer access cards.