Quick Test

Quick test for simple villa application

Wiring

Device

Power up

Power up all devices.

Test Case 1 - Setup/Calling

1.1 Onsite tool

On one of the monitors, tap “Settings” → “Installer” → “Onsite Tool” → “6666666” by default

If all devices are in default(new out of the box) a menu will show as below:

1.2 Configure one-button calling to all(one family)

Tap “Onefamily.” The monitor address will be IM1, and IM1(2) means salve. The dashboard menu will also flash.

Make a call

Press the lowest button, both monitors shall ring.

1.3 Configure multi-button calling to all(Multi family)

Clear and set up for multi-button calling

After test point 1.2 the address has been set up, first to clear the address settings. Tap “clear” and wait for a second tap “Multi family”

Find where is the devcie

Make a call

Press the lowest button, both monitors shall ring.

Button1 - IM1, Button2 - IM2.

Test Case 2 - Cards

2.1 Add cards

On one of the monitors, tap “Settings” → “Card manager” → select door station.

The menu as below, and tap “UserCard Add” to add a card：

Add card in 2 ways:

• Input card number

• Tap the card when the DH622 nameplate flahes.

2.2 Test cards

Tap the cards just added to see if the card works

2.3 Delete cards

Delete by tapping cards/inputting cards number

Delete by list

Tap “UserCard List” and tap the card in the list that needs to be deleted, tap again to confirm the deletion.

Test Case 3 - Lock/Remote configures

3.1 Remote configure

Remote configure DH622 lock(relay) output with below

On one of the monitors, tap “Settings” → “Installer” → “Onsite Tool” → tap the setting icon below the door station

3.2 Remote configure lock/relay parameters

In the “Parameter” modify RL_1_MODE and RL_1_TIMER, and release the door lock once (by exit button or monitor unlock) to apply.

3.3 Connect to your lock to see if that works

Notice when using the door station internal power the lock, the lock shall be 12Vdc <300mA.

Test Case 4 - App

4.1 Connect to WiFi

On the monitor, tap “Settings” → “Manager”, tap “Wi-Fi switch” to ON, and select the Wi-Fi name in the list, input the password, and connect.

4.2 Download the APP and scan the QR code

Search “VDP connect”

Use “VDP connect” to scan the QR code

Setup divert the call to APP

4.3 Make a call and test.

Make a call from the door station, and receive calls on the APP.