Three configuration methods of DX821

Owned by Jeff
Last updated: Dec 15, 2022
3 min read

 

XD-Device is a brand new APP used as a tool management system. Currently only supported on Android

First, need to download XD-Device and install it .

When installing, grant authorization, such as network access, file reading, etc.

One. via hotspot of cellphone (recommended when test)

 

  1. Devices: DX821, DT471 (or DT17S, DT437), PC7, IPC + Power supply, Android cellphone (with XD-APP installed)

  2. Connect all above devices

  3. On cellphone set a hotspot with name “VTK” and password “88888888”, then tap button “TK-A” of DX821 for 3 seconds to connect.
    Note: during this test, please turn off Wi-Fi and use mobile data

  4. Open XD-APP, add DX821 on XD-APP, and make connection so could do the configuration.
    Details please check point 2 of https://2easy-wiki.atlassian.net/wiki/spaces/IX2021RELEASE/pages/edit-v2/1526300673

  5. Add IPC to DX821
    In this environment must set IPC as Static IP address by a PC. Then on XD-APP, go to menu “LAN Config“ to set DX821 as Static IP address, too.
    Now can choose any way to add IPC as below.
    Way 1: On DX821 itself, press TK-B for 6 seconds to add above IPC. (In this way must set the IPC as “name:admin”, “password: admin” (or “password: test1234”)
    Way 2: On XD-APP, go to menu “Add IPC”, then input name and passwords (could be self-defined) of a IP camera, then this IPC will be added to DX821

 

Two. via LAN with Internet

  1. Devices: DX821. DT471 (or DT17S, DT437), PC7, IPC + Power supply, Android cellphone (with XD-APP installed), Router with Internet (including DHCP server), CAT5 cable

  2. Connect all above devices, and press TK-B for 3 seconds so DX821 will connect to the Cloud

  3. On XD-APP, Open XD-APP, add DX821 on XD-APP, and make connection so could do the configuration.
    Details please check point 2 of https://2easy-wiki.atlassian.net/wiki/spaces/IX2021RELEASE/pages/edit-v2/1526300673

  4. add IPC to the system
    Same as point 5 of “One. via hotspot of cellphone“.

 

Three. via WLAN with Internet

 

  1. Devices: DX821. DT471 (or DT17S, DT437), PC7, IPC + Power supply, Android cellphone (with XD-APP installed), Router with Internet (incl. DHCP server)

  2. Connect all above devices

  3. On cellphone set a hotspot with name “VTK” and password “88888888”, then tap button “TK-A” of DX821 for 3 seconds to connect.

  4. Open XD-APP, add DX821 on XD-APP, and make connection so could do the configuration
    Details please check https://2easy-wiki.atlassian.net/wiki/spaces/IX2021RELEASE/pages/edit-v2/1526300673 , point 2

  5. Go to menu “Add wifi“, enable it, and input SSID and PWD, tap “Add WIFI” and “Save”

  6. add IPC to the system
    Same as point 5 of “One. via hotspot of cellphone“.