Cable update usually for full release version or flash firmware for those IX device failure to update via SD card or online update.
USB cable update requires
For advance update you will need, an USB debug converter, PC (Windows version) or laptop with USB tool version firmware (Auto-Writer)
Update IX Devices
1
Connect USB debug converter and IX device as below: (DO NOT CONNECT PC FIRST), connection as below. IX850, IX821, IX610, and IX471
Connections |
|---|
| There are no images attached to this page. |
2
Unzip firmware zip pack and run “AutoWriter.exe”, please match your device with correct firmware pack.
3
when you see below window, “Plug USB and power-on to start programming” and now connect the USB wire to your PC (Don’t need to power up the unit.). After the USB connected, wait for seconds the device will automatically write:
4
With below massage the write is finish.
