Preparation

1. Devices list:

...

• New Monitor: IX471S*1pcs, firmware version: V1.0.0.2109271531-01

• Updated DS: IX850*1pcs , firmware version: V2.0.0.2109261415-10

• Old Monitor:    IX471*1pcs （ If there is a need for comparison）

• IP camera: 1~3pcs, standard, onvif, details see belowvideo ecoding H264 or H265

• PoE Switch: 1~2pcs, standard/// 1pcs PC7（without DPS)

• Mobile phone: with VDP connect application , version:

• Network: two different network, one for common, one for private Simulation test

IX850S firmware udpate

IP Camera Applicable instructions and presets

Network requirements for IX471S - What LAN/Wi-Fi infrastructure do I need? （待核实）

• Cables: Cat5 cables some

• Others: if interesting（ not necessary ) :

  • Mesh Router

  • Primary and secondary Router

  • WiFi Powerline adaptor

  • AC and AP

Demo test for different scenario

...

2. Firmware update:

IX850S

• Via Computer

• Tools: ST-LINK & USB-Tool, sent by VTK

• Software： two, sent by VTK

• IX850S firmware udpate (by USB, autowriter)

• IX850Ss STM8 chip update (by St-link tool)

IX471S

• Online update

IX471S Online Update (Draft)

Scenario 1 ： Wireless connection in villa application

In this scenario, users can use WiFi for connection and divert.

Pre-set before test

To success act, must make sure below settings in correct :

1. in monitor:

...

1. Call Nbr.

• No need to set in IX850S

• set the IX471S to (SS)1

2. WiFi Connection

• Settings→Installer→IP Address

  (1) IX Net Mode: set to WLANconnect

(2) Wlan Setting→set the Wi-Fi

...

Switch to ON

...

(3) connect the Wi-Fi by manual or search

• double check the correct icon shown in main menu

3.

...

Sip Connection

• Manager→SIP config

(1) SIP enable: set to Enable

(2) SIP Network setting: set to WLAN

...

1. connect IP camera

Add

(3) Use Default

(4) Re register

• double check the correct icon shown in main menu

• Scan the QR code via VDP Connect APP with the latest version

4. Prest the IP camera

• use computer to set DHCP and the parameters below

(if need static, then set the other devices with the same strategy）

...

5. Add the IP Cameras to the monitor

Add by search or Add by manual

• Settings→Ext.Unit→WLAN IPC camera →

(1) Add by search//or by manual

...

(2) chose

(3) input “user name” and “ password”

...

test

Scenario 2 ： Wired Lan connection & common network

...

This scenario and function are the same as the old version.

The door station IX850 initiates the transfer call, and the monitor IX471S does not need any additional settings except for the basic settings such as Call_Nbr.

tests

for the differences are as follow :

IPS TFT

The screen resolution is better than before, especially when the image is displayed on a HD camera.

Thanks to the IPS screen, the viewing angle is better than the old model.

IP camera

in this scenario,

• connect mode : Settings→Installer→IP Address→IX Net Mode: set to LAN

• divert mode : Manager→SIP config→SIP Network setting: set to LAN

• Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save

Quad & PiP

Added the functions of monitoring QUAD and incoming call PIP -IP camera setting

PiP （Picture in picture）

...

(4) Login

(5) Save

add the IP cameras one by one

6. set the PiP function as default

• Settings→Installer→Onsite tools→”🔍”→start search

(1) choose the door station

(2) Parameter→Others→video proxy

...

Test

1. Call (PiP) , images switch by touch

2. Talk and unlock

3. monitor ( quad ), re-order the four images

4. Video record ( in call, in monitor, in quad ) and play back

5. shortcut setting

6. divert ( set the Call scene to “ Divert call always” or “ Divert call if no answer”

Scenario 2 ： Private home Wi-Fi & private IP camera

In this scenario, users can use their own WiFi but need cabled to the system.

Pre-set before test

To success act, must make sure below settings in correct :

1. in monitor:

...

1. Call Nbr.

• No need to set in IX850S

• set the IX471S to (SS)1

2. WiFi Connection

• Settings→Installer→IP Address

  (1) IX Net Mode: set to LANconnect

(2) Wlan Setting→set the Wi-Fi

...

Switch to ON

...

(3) connect the Wi-Fi by manual or search

• double check the correct icon shown in main menu

3.

...

Sip Connection

• Manager→SIP config

(1) SIP enable: set to Enable

(2) SIP Network setting: set to WLAN

...

2. connect IP camera

Add by search or Add by manual

...

(3) Use Default

(4) Re register

• double check the correct icon shown in main menu

• Scan the QR code via VDP Connect APP with the latest version

4. Prest the IP camera

• for the private IP Cameras , use computer to set DHCP and the parameters below

(if need static, then set the other devices with the same strategy）

...

• for the common IP Cameras, if without DHCP router connect, need set Static IP address first.

5. Add the IP Cameras to the monitor

Private IP cameras, ( in home)

• Settings→Ext.Unit→WLAN IPC camera

(1) Add by search//or by manual

(2) chose

(3) input “user name” and “ password”

(4) Login

(5) Save

add the IP cameras one by one

Common IP cameras, ( in building) --if added

• Settings→Ext.Unit→ IPC camera

(1) Add by search//or by manual

...

(2) chose

(3) input “user name” and “ password”

...

test

...

(4) Login

(5) Save

add the IP cameras one by one

6. set the PiP function as default

• Settings→Installer→Onsite tools→”🔍”→start search

(1) choose the door station

(2) Parameter→Others→video proxy

...

Test

1. Call (PiP) , images switch by touch

2. Talk and unlock

3. monitor ( quad ), re-order the four images

4. Video record ( in call, in monitor, in quad ) and play back

5. shortcut setting

6. divert ( set the Call scene to “ Divert call always” or “ Divert call if no answer”

Scenario 3 : Hybrid Lan & Wlan connection

...

Drawio
zoom 1 simple 0 inComment 0 pageId 1063092258 custContentId 1063649395 lbox 1 diagramDisplayName 14.drawio contentVer 38 revision 38 baseUrl https://2easy-wiki.atlassian.net/wiki diagramName 14.drawio pCenter 0 width 765810.659999999999999 links tbstyle height 391642.5000000000001

In this scenario, use common internet and wireless connect monitor to bus

Pre-set before test

To success act, must make sure below settings in correct , and end user can chose use home network or common network.

Preset before the test

Preset similar as above two scenarios, something need pay attention as below:

1. in apartment 1

setting in monitor :

• connect mode: Settings→Installer→IP Address→IX Address→IX Net Mode: set to WLAN

• connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set Address→Wlan Setting→set the Wi-Fi Switch to ON

  then connect the Wi-Fi by manual or search.

...

• divert mode : Manager→SIP config→SIP config→SIP Network setting: set to WLAN

...

2. connect IP camera

...

Add by search or Add by manual

...

camera

...

• Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room1 )

Test

Scenario 5 : Hybrid Lan & Wlan connection+private network

...

In this scenario, use private network and wireless connect monitor to bus

Pre-set before test

To success act, must make sure below settings in correct :

...

2. in apartment 2

setting in monitor :

• connect mode: Settings→Installer→IP Address→IX Address→IX Net Mode: set to WLAN

• connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set Address→Wlan Setting→set the Wi-Fi Switch to ON

  then connect the Wi-Fi by manual or search.

...

• divert mode : Manager→SIP config→SIP config→SIP Network setting: set to LAN

2. connect IP camera

• Add by search or Add by manual

• Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save

Test

1. Call (PiP) , images switch by touch

2. Talk and unlock

3. monitor ( quad ), re-order the four images

4. Video record ( in call, in monitor, in quad ) and play back

5. shortcut setting

6. divert ( set the Call scene to “ Divert call always” or “ Divert call if no answer”