| Table of Contents |
|---|
Preparation
New Monitor: IX471S*1pcs, firmware version:
Updated DS: IX850*1pcs , firmware version:
...
IP camera, wired or wireless :
IP Camera Applicable instructions and presets
PoE: 1~3pcs, standard, onvif, details see below
PoE Switch: 1~2pcs, standard
Mobile phone: with VDP connect application, version:
Network: two different network, one for common, one for private Simulation test
IP Camera Applicable instructions and presets
Network requirements for IX471S - What LAN/Wi-Fi infrastructure do I need? （待核实）
...
others, if interesting（ not neccessory necessary ) :
Mesh Router
Primary and secondary Router
WiFi Powerline adaptor
AC and AP
Demo test for different scenario
In order to simplify the description, the test scenarios in this document are based on the IP policy of DHCP & AUTO.
Scenario 1 ： Wired Lan connection &
...
common
...
network
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This scenario and function are the same as the old version.
...
The screen resolution is better than before, especially when the image is displayed on a HD camera.
Thanks to the IPS screen, the viewing angle is better than the old model.
Added the functions of monitoring QUAD and incoming call PIP -IP camera setting
Added multi-theme switching function
Scenario 2 ： Wired Lan connection &
...
private
...
network
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
In this scenario, users can use their own WiFi .
To success act, must make sure below settings in correct :
1. in monitor:
connect mode : Settings→Installer→IP Address→IX Net Mode: set to LAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search.
divert mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save
3. test
Scenario 3
...
: Hybrid Lan & Wlan connection+common network
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
To success act, must make sure below settings in correct :
1. in monitor:
connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
divert mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room2 )
Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room1 )
3. Test
Scenario 4 : Hybrid Lan & Wlan connection+private network
| Drawio | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
|
...
|
...
|
...
In this scenario, use private network and wireless connect monitor to bus
To success act, must make sure below settings in correct :
1. in monitor:
connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
divert mode : Manager→SIP config→SIP Network setting: set to LAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save