Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Preparation

  • IX471S, firmware version:

  • IX850, firmware version:

IX850S firmware udpate

  • IP camera, wired or wireless :

IP Camera Applicable instructions and presets

  • PoE, standard

  • Mobile phone with VDP connect application, version:

  • Network:

Network requirements for IX471S - What LAN/Wi-Fi infrastructure do I need? （待核实）

others, if interesting（ not neccessory ) :

  • Mesh Router

  • Primary and secondary Router

  • WiFi Powerline adaptor

  • AC and AP

In order to simplify the description, the test scenarios in this document are based on the IP policy of DHCP & AUTO.

Scenario 1 ： Wired Lan connection & use common internet

This scenario and function are the same as the old version.

The door station IX850 initiates the transfer call, and the monitor IX471S does not need any additional settings except for the basic settings such as Call_Nbr.

The differences are as follow :

  1. The screen resolution is better than before, especially when the image is displayed on a HD camera.

  2. Thanks to the IPS screen, the viewing angle is better than the old model.

  3. Added the functions of monitoring QUAD and incoming call PIP -IP camera setting

  4. Added multi-theme switching function

Scenario 2 ： Wired Lan connection & use private internet

In this scenario, users can use their own WiFi .

To success act, must make sure below settings in correct :

1. in monitor:

  • connect mode : Settings→Installer→IP Address→IX Net Mode: set to LAN

  • connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON

    then connect the Wi-Fi by manual or search.

  • divert mode : Manager→SIP config→SIP Network setting: set to WLAN

2. connect IP camera

Add by search or Add by manual

  • Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save

3. test

Scenario 3 ： Hybrid Lan & Wlan connection

In this scenario, use common internet and wireless connect monitor to bus

To success act, must make sure below settings in correct :

1. in monitor:

  • connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN

  • connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON

    then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)

  • divert mode : Manager→SIP config→SIP Network setting: set to WLAN

2. connect IP camera

  • Add by search or Add by manual

  • Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room2 )

  • Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room1 )

3. Test

In this scenario, use private network and wireless connect monitor to bus

To success act, must make sure below settings in correct :

1. in monitor:

  • connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN

  • connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON

    then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)

  • divert mode : Manager→SIP config→SIP Network setting: set to LAN

2. connect IP camera

  • Add by search or Add by manual

  • Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save

3. Test

  • No labels