Use the menu to set the device address instead of the DIP dialing mode, the steps as below:
main menu → Settings → Installer → Cal_Nbr → input password “66666666” → setup the the device address by input number 01~32.
DX2 only can be set as Master monitor , other DT monitors can be set as Slaver monitors in system.
2. The differences between DX1 and DX2 on device address as below:
DX2 | DX1 |
|---|---|
32 | 00 |
01 | 01 |
02 | 02 |
……. | …… |
31 | 31 |