Installer - Onsite Tool (DH-APT)

This page shows the “Onsite Tool” to configure the 2Easy DH APT system. (DS1 shall be DH622)

Suitable for DH470/482.

Before setup

The onsite tool menu will be different for “DH-SS” and “DH-APT”, this page shows the onsite tool menu for DH-APT.

What is system type:

In the list, each item starts with :

DS(1): means the item is a door staiton in address (1)

IM 1: means other monitors in address 1 master

My IM(1): means the monitor operates now.

IM 1 (2): means other monitors in address 1 slave 2

and end with device “Name”

Tap the device in the above list except for “MY IM” which will lead to monitor installer settings.

The menu on the left tab:

A read-only parameters, different types of devices offer different information, by at least:

Address, Name, Firmware version.

Configurable parameter for address.

Do not change the door station address via this menu, unless you know what this means.

Missing DS1 will lose connection to the system.

Depending on the device, the parameters could be different.

Remote upgrade the monitor.

Depending on the device, the settings for more could be different. by at least has:

Reboot and restore factory settings.