Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Prepare

1. USB tool (could get from V-Tek)

2. Firmware package

Please download following firmware “IX850S_AutoWriterV3.00.01_20211210153307.rar” to your PC.

How to update?

  1. Wire as below: (DO NOT CONNECT to PC at FIRST).

  2. Unzip “IX850S_AutoWriterV3.00.01_20211210153307.rar” (MUST UNZIP) and run “AutoWriter.exe”.

  3. When you see below window, “Plug USB and power-on to start programming” , now connect the USB wire to your PC (Don’t need to power up the unit.). After the USB connected, wait for seconds the device will be written automatically.

  4. With below massage the write is finish.

For more details, please check the video by this link: https://1drv.ms/v/s!ApVgqTKy9CI-h2ygJZehbsjCHugU?e=Cd2pu8

  • No labels