To Factory Default
Restore IX device to factory default
Restore to factory default
Door station IX850
When door station IX850 in “Installer Mode”, tap “Installer Mode” -> “settings” -> “Restore and backup” ->tap once again to confirm
Item | Not Restore | Restore | description |
Access Card |
| • | Restore to None |
Installer settings |
| • |
|
Password |
| • | All PWD |
Manager settings |
| • |
|
Voice promote files | • |
|
|
Language translate | • |
|
|
Virtual user |
| • | Delete All |
DT-IM |
| • | Delete All |
Call record |
| • |
|
Customization RES | • |
| Logo/Icon files |
R8001 (RES) | • |
| A RES base file |
Monitor IX471
Tap “Settings” -> “Manager” -> “Backup and restore” tap once again to confirm
Item | Not Restore | Restore | description |
Installer settings |
| • |
|
Password |
| • | Private password |
User settings |
| • | Ring tune settings |
Language translate | • |
|
|
Call record |
| • | Delete all |
Customization RES | • |
| Logo/Icon files |
R8001 (RES) | • |
| A RES base file |
Outdoor station IX610
Bridge EB+ and EB-, and long press 15s to setup factory default
Item | Not Restore | Restore | description |
Installer settings |
| • |
|
Voice promote files | • |
|
|
Customization RES | • |
| Logo/Icon files |
R8001 (RES) | • |
| A RES base file |
Door Station IX821
Power on IX821, then short-circuit BOTH PORTS’ EB+ and EB- for 10 seconds at the same time (it is a little hard, please be patient and try more times), then IX821 will be set to factory default.
Video of operation as below: