Preparation
IX471S, firmware version:
IX850, firmware version:
IP camera, wired or wireless :
IP Camera Applicable instructions and presets
PoE, standard
Mobile phone with VDP connect application, version:
Network:
Network requirements for IX471S - What LAN/Wi-Fi infrastructure do I need? （待核实）
others, if interesting（ not neccessory ) :
Mesh Router
Primary and secondary router
WiFi Powerline adaptor
AC and AP
In order to simplify the description, the test scenarios in this document are based on the IP policy of DHCP & AUTO.
Scenario 1 ： wired Lan connection & use common internet
This scenario and function are the same as the old version.
The door station IX850 initiates the transfer call, and the monitor IX471S does not need any additional settings except for the basic settings such as Call_Nbr.
The differences are as follow :
The screen resolution is better than before, especially when the image is displayed on a HD camera.
Thanks to the IPS screen, the viewing angle is better than the old model.
Added the functions of monitoring QUAD and incoming call PIP -IP camera settingIP Camera Applicable instructions and presets
Added multi-theme switching function
Scenario 2 ： wired Lan connection & use private internet
In this scenario, users can use their own WiFi .
Settings as below:
in monitor:
check: Settings→Installer→IP Address→IX Net Mode: set to LAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search.
set and chose home wifi mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
3. test
Scenario 3 ： Hybrid Lan & Wlan connection
In this scenario, use common internet and wireless connect monitor to bus
Settings as below:
in monitor:
check: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
set and chose home wifi mode : Manager→SIP config→SIP Network setting: set to WLAN
In this scenario, use private network and wireless connect monitor to bus
Settings as below:
in monitor:
check: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
set and chose home wifi mode : Manager→SIP config→SIP Network setting: set to LAN