...
When door station in “Installer mode”, tap “Installer mode” -> “Settings” -> “Upgrade”.
...
Server: select an update server, usually is Server1[47.91.88.33] unless there is a special notice.
Download code: for different customization door station has different code, for V-TEC English standard version, the code is 985000.
For customize monitor, please check with technical support for your update code
Tap “Check” to check if there is an available update, and tap “Install” to update, if tips with SD card requires, please insert a SD card.
Monitor IX471S / IX482 / IX470
On IX471monitor, tap “Settings” -> “Installer” -> “Upgrade” -> input password (66666666 by default), to enter the upgrade page as below,.
...
Server: select an update server, usually is Server1Sever2 [47.91106.88104.3338] unless there is a special notice.
Download code: for different customization IX471S has different code, for For V-TEC English standard version, the code is 947100as below.
Monitor | Sever | Download code |
|---|---|---|
IX471S | Sever2 [47.106.104.38] | 471-1all |
IX482 | 482-1all | |
IX470 | / |
For customize monitor, please check with technical support for your update code
Tap “Check” to check if there is an available update, and tap “Install” to update (Unlike old IX471, new IX471S not need SD card inserted to do Online update), if Code info show up, then tap “Installing” to start the update.
[ Specially, after tap “installing”, if pop up “Please insert SD card”, that means the memory is full.
Please insert a SD card and retry. Or delete some videos on menu “Call record”, to free enough memory to download the Firmware. ]
It will take around 20 seconds to finish installation, then IX471S will reboot itself automatically.
Please check the video of online update as below.
...