Remote configure IX devices, Configure IX device via Monitor/IX850TFT monitor or IX850 door station
| Table of Contents |
|---|
| Info |
|---|
Onsite tool using for configure and check an IX device remotely on another IX monitor (connected with the same subnet) |
Search devices in onsite tool
In order to configure an IX device, first step is to search devices. Only monitor and IX850 has onsite tool. Check below
How to search devices
Into onsite tool menu, check below steps
...
BD_Nbr: input devices’ BD_Nbr. “0099” by default, “9999” means all BD_Nbr. Only devices with input BD_Nbr will be search
...
3. Tap “search”, and display result list.
Search monitor with known Call_Nbr on IX850
Specially to search a monitor with known Call_Nbr, or select names from namelist, this could be only done with IX850.
...
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Search devices result
Example: Search Online menu of IX850 and IX471S
...
“IM 2” is device type and abbreviated Device_Addr
“IX471S” is the name of device
“192.168.001.158“ is device’s IP address
“02:51” is the uptime since power onon， when more than 60 minutes, will show up as “X h Xm”.
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Remote device manages
Choose device in search list to manage this device
...
Device/Device info: Read only table, device’s overview.
Call_Nbr: In this tab, setup “Call_Nbr” for the device.
Parameter: Change parameters for the device.
Upgrade: Upgrade device remotely, specially, in remote manage “SD card” as server in upgrade, SD card means the SD card in target device.
Reboot: reboot the device.
Appendix 1
Call_Nbr and IP address in onsite tool
Call_Nbr and IP address are basic settings for IX device.
Check and modify Call_Nbr
Check current Call_Nbr
In onsite tools, search, and locate target device, tap the device in the list.
...
The setting menu is “What you see is what you get”
Modify Call_Nbr
For different target device the menu will have different “Call_Nbr” settings. As below
...
Current OS is same as DS, GL is same as IM, which might change in the future.
Check and modify IP address
Check current IP address
In onsite tools, search and local target device, tap the device in the list.
...
The setting menu is “What you see is what you get”
Modify IP settings
Change to “Static” if you need to change IP address.
...