...
Into onsite tool menu, check below steps
On monitor (IX471IX471S/IX482/IX471(GL)/IX439): tap “Settings” -> “Onsite tool” -> “🔍”
...
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Remote device manages
Tap Choose device in search list to manage device, menu title in “RED” means now is in remotely managing device, and current device will display in the title.
...
· this device
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Device/Device info: Read only table, device’s overview.
...
Call_Nbr: In this tab, setup “Call_Nbr” for the device.
...
Parameter: Change parameters for the device.
...
Upgrade: Upgrade device remotely, specially, in remote manage “SD card” as server in upgrade, SD card means the SD card in target device.
...
Reboot: reboot the device.
...
Appendix 1
Call_Nbr and IP address in onsite tool
...
Target device is DS (door station type, such as IX850/IX821), “BD_Nbr”, “DS_Nbr” could be changed.
| Drawio | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
|
Target device is IM (monitor type, such as IX471IX471S/IX821IX482), “Device_Addr (BD_Nbr +RM_Nbr)”, “MS_Nbr” could be changed.
| Drawio | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
|
Current OS is same as DS, GL is same as IM, which might change in the future.
...