allCall_Nbr, “Call Number”, a general name for multi parameters, which is use used for callcalling, monitoring and addressing an IX device.
...
In “Call_Nbr” menu, Set “Device_Addr “to “(SS) Standalone building” and input RM_Nbr. After, address display as “SS(RM_Nbr)” like below:
...
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Example: room 1 set RM_Nbr 0001, room 2 set RM_Nbr 0002, different room shall have different RM_Nbr.
...
Specially, unlike Device_Addr, calling via Global_Nbr and Local_Nbr, only the monitor/s with same numbers will responds the call, if the monitor/s has slave monitor, slave monitor won’t reply Global_Nbr or Local_Nbr if it is not the same.
Example: monitor IX471 IX471S as belowabove picture, setting Device address in (NS) 00020003, give Global_Nbr as 2103 and Local_Nbr 103:
...
On door station BD_Nbr = 0002, input “0003” (RM_Nbr) or “103” (Local_Nbr) could call to this monitor.
...