...
To success act, must make sure below settings in correct :
1. in monitor:
connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
divert mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room2 )
Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room1 )
...
To success act, must make sure below settings in correct :
1. in monitor:
connect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
divert mode : Manager→SIP config→SIP Network setting: set to LAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save
...