...
Mesh Router
Primary and secondary routerRouter
WiFi Powerline adaptor
AC and AP
...
In order to simplify the description, the test scenarios in this document are based on the IP policy of DHCP & AUTO.
Scenario 1 ：
...
Wired Lan connection & use common internet
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
The screen resolution is better than before, especially when the image is displayed on a HD camera.
Thanks to the IPS screen, the viewing angle is better than the old model.
Added the functions of monitoring QUAD and incoming call PIP -IP camera setting IP Camera Applicable instructions and presets
Added multi-theme switching function
Scenario 2 ：
...
Wired Lan connection & use private internet
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
In this scenario, users can use their own WiFi .
Settings as belowTo success act, must make sure below settings in correct :
1. in monitor:
checkconnect mode : Settings→Installer→IP Address→IX Net Mode: set to LAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search.
set and chose home wifi divert mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save
3. test
Scenario 3 ： Hybrid Lan & Wlan connection
...
In this scenario, use common internet and wireless connect monitor to bus
Settings as belowTo success act, must make sure below settings in correct :
1. in monitor:
checkconnect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
set and chose home wifi divert mode : Manager→SIP config→SIP Network setting: set to WLAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room2 )
Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save ( for room1 )
3. Test
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
In this scenario, use private network and wireless connect monitor to bus
Settings as belowTo success act, must make sure below settings in correct :
1. in monitor:
checkconnect mode: Settings→Installer→IP Address→IX Net Mode: set to WLAN
connect the Wi-Fi : Settings→Installer→IP Address→Wlan Setting→set the Wi-Fi Switch to ON
then connect the Wi-Fi by manual or search. ( noted, not the WiFi of home/private but the common)
set and chose home wifi divert mode : Manager→SIP config→SIP Network setting: set to LAN
2. connect IP camera
Add by search or Add by manual
Settings→Ext.Unit→WLAN IPC camera →Add by search//or by manual →chose → input “user name” and “ password” → save