Unlock password and notice
There are two kinds password:
Public password
Maximum one code, four digits storage and manage in door station.
Each door station uses its own public password
Confirm password without tapping ‘unlock’
Private password
Each master monitor has 1 code, 4 digits storage and manage in monitor.
Input Call_Nbr and private password with tapping ‘unlock’ to release doors.
Private code verifies on monitor, to use private code monitor must exist.
Public password
Manage on door station
Default public password: 1234
Manage menu: “Manage menu” -> “unlock code setting”
Installer mode: “Installer Mode” -> “Settings” -> “unlock code setting”
“Change public unlock code” to setup a new code.
Options
“Disable code unlock”: not allow unlock via any password on this door station.
“Enable user query”: whether allow monitor to check this door station’s public password
Check public code on monitor
Door station with “Enable user query” will display correct public code, otherwise will display “Invalid code”
On monitor tap “Settings” -> “Manager” -> “Common unlock code” monitor will display all available door station.
Unlock with Public code:
On door station unlock menu input 4 digits unlock password if is correct the door station will release lock1 without tap “🔑”
Private code
Manage on monitor
On monitor tap “Settings” -> “Manager” -> “private unlock code”, tap once to display current private code, and tap again to input 4 digits private unlock code.
Unlock with Private code
In SS system
On door station unlock menu normally input “RM_Nbr + private code” to unlock.
Example: monitor set as SS and RM_Nbr = 0002 and private unlock code is 5432, input “00025432” and tap “🔑” to unlock (leading 0 could be ignore,25432 also works)
More! You could have other Call_Nbr + Private unlock code” in this case, such as “Local_Nbr + private unlock code”
In NS system
On door station (DS), input “RM_Nbr + private code” same as in SS system.
On common door station (CDS), input “BD_Nbr + RM_Nbr + private code”
Example: monitor set as NS and BD_RM_Nbr = 00010002, private unlock code is 5432
On door station BD_Nbr = 0002, input “00025432” and tap “unlock” to unlock.
On common door station BD_Nbr = 0000, input “000100025432” and tap “🔑” to unlock.
Leading 0 could be ignored.
More! you could have other “Call_Nbr + Private unlock code” in this case, such as “Local_Nbr + private code” on DS, and “Global_Nbr + private code” on CDS.