Device address in IX system, 10 digits (must be unique)

Device_Addr Consist of 3 parts:


BD_Nbr	Building(Site&Block) number	4 digits
RM_Nbr	Room(Floor&Apartment) number	4 digits
MS_Nbr	Master/Slave number	2 digits

Device_Addr must be unique in one system

All numbers are digits only, and leading 0 must be kept

If 2 or more Monitors are installed in a room, and are assigned with same BD_Nbr+RM_Nbr. All Monitors will ring if a call is made, any one answering the call will cause others turn off automatically.

SYSTEM TYPE	DEVICE	BD_Nbr	RM_Nbr	MS/DS_Nbr	Device_Addr
VS	IM	0099(fixed)	0001(fixed)	01~32	00990001XX
VS	OS	0099(fixed)	0001(fixed)	51~82	00990001XX
SS	DS	0099(as default)	0000(fixed)	01~48	00990000XX
SS	IM	0099(as default)	0001~9999	01~32	0099XXXXXX
SS	OS	0099(as default)	0001~9999	51~82	0099XXXXXX
SS	BGL	0099(as default)	0000(fixed)	1~48	00990000XX
NS	CDS	0000(fixed)	0000(fixed)	1~48	00000000XX
NS	CGL	0000(fixed)	0000(fixed)	51~98	00000000XX
NS	DS	0001~1999	0000(fixed)	1~48	XXXX0000XX
NS	IM	0001~1999	0001~9999	01~32	XXXXXXXXXX
NS	OS	0001~1999	0001~9999	51~82	XXXXXXXXXX

MS_Nbr

MS_Nbr is for identification if multi device are installed in same location.

Allocation of MS_Nbr:

kept	00	--
for monitors IX471S.IX482	01-32	01, Master as Default
for door station IX850.IX821	01-48	01, Master as Default
for door station IX610	51-82	51, Master as Default

For Master device, MS_Nbr can be ignored，show as: 0032 0101

For Slave device, MS_Nbr must be pointed out，show as: 0032 0101(02)

RM_ADDR, factory default

IX471S,IX482	0099 0001 (01)
IX610	0099 0001 (51)
IX850	0099 0000 (01)

How to check and modify

Item Code	Check	Modify
IX471S,IX482	“settings”→ “Installer”→ “Call_Nbr” or in main menu	“settings”→ “installer”→ “Call_Nbr”
IX850	“installer mode” →” settings”→”About”	“installer mode” →” settings”→”Call_Nbr”
IX610.IX821	via IX850 or IX471.IX439 in one system, “onsite tools” → search → ”Call_Nbr”