IX-401
Requirments:
How to make it work :
1 . Connect IX401 to IX471 as above and installed with bracket.
2 . Do settings on monitor as below , and choose “ handset ”
“Settings” -> “Installer” -> “Parameter” -> “Others” -> “Z port Mode”: “ handset ”
3 . Power off and wait 20s, and power on the unit to apply the change
Notes :
Once connecting IX401, alarm and audio handset function are not available
If IX401 has to be put at the right side of monitor, no need to use special bracket.
IX-DJ4
Thanks to this feature, we have an economic solution to slaver unit, this audio handset can connect with any of the monitor and work with it in parallel
Requirments:
How to make it works :
1 . connect IX-DJ4 to IX471 as above , cable less than 10 meters.
2 . do settings on monitor as below , and choose “ DJ4A ”
“Settings” -> “Installer” -> “Parameter” -> “Others” -> “Z port Mode”: “ DJ4A ”
3 . Power off and wait 20s, and power on the unit to apply the change
Notes :
Once connecting IX-DJ4, alarm and handset DJ401 function are not available
One monitor only can connect one IX-DJ4