| Table of Contents |
|---|
...
Within 10 seconds after power-on, press and hold the Call key until the "BP" sound is heard for 3 times and then release it (the "BP" sound will be heard once per second) to enter the unlocking time setting state, and the indicator light will flash slowly;
...
Within 10 seconds after power-on, press and hold the Call key until the "BP" sound is heard for 6 times and then release it (the "BP" sound will be heard once per second) to enter the unlocking mode setting state, and the indicator light will flash quickly;
| Info |
|---|
This state is maintained for 10 seconds, and automatically exits after 10 seconds of no operation. |
Step2. Set Unlock Mode Time
Press the Call key to switch the unlocking mode back and forth;
...
Setup | Prompt tone | Indicator light | Remark |
|---|---|---|---|
Enter the unlocking time setting state | 3 BPs | Slow flash | |
Enter the unlocking mode setting state | 6 BPs | Quick flash | |
Unlock time setting | BPs | Slow flash | |
Unlock_NO mode | BP + long tone | Quick flash | Output + 12 V when unlocked |
Unlock_NC mode | two tones of BP | Quick flash | After setting, the LK + and LK- ports always output + 12V voltage. |
Exit | - | always on |