step1. 进入设置状态
DT616上电10s内,按住Call键直到听到九次”BP”音后松开(每秒会响“BP”一声),进入主机地址设置状态,指示灯“灭.亮.灭.亮.灭.亮”的双闪,间隔1s后继续闪;[此状态维持10s,无操作后自动退出]
step2. 设置主机地址
按Call键设置主机地址,每按一次切换一个地址;
设置过程中会通过”BP”音提示地址;
step3. 保存&退出
设置后,无操作10s内自动保存并退出;
设置后,室外机断电自动保存并退出;
...
设置操作
...
提示音
...
指示灯
...
进入设置状态
...
响九次BP音
...
双闪
...
Step1. Enter the setup state
Within 10 seconds after power-on, press and hold the Call key until the "BP" sound is heard for 9 times and then release it (the "BP" sound will be heard once per second) to enter the DS address setting state, and the indicator light will flush ” off,on / off,on/ off,on”, there is an interval of 1s, and repeat flush.
[This state is maintained for 10 seconds, and automatically exits after 10 seconds of no operation]
Step2. Set the address
Press the Call key to set the DS address, and switch one address each time; The address will be prompted by the "BP" sound in the setting process;
Step3. Save & Exit
After setting, automatically save and exit within 10s without operation
or the outdoor unit will automatically save and exit when the power is off;
Setup | Prompt tone | Indicator light |
---|---|---|
Enter the setup state | 9 BPs | off-on |
DS address | DS1--->BP+ 长音 | 双闪off-on |
DS2--->BP,BP二声BP | 双闪off-on | |
DS3--->BP,BP,BP声BP | 双闪off-on | |
DS4--->BP,BP,BP,BP四声BP | 双闪off-on | |
退出设置Exit | - | 常亮 |
...
Always on |