Page Comparison

step1. 进入设置状态

DT616上电10s内，按住Call键直到听到九次”BP”声后松开（每秒会响一次“BP”声），进入主机地址设置状态，指示灯“灭.亮.灭.亮.灭.亮”的双闪，间隔1s后继续闪；[此状态维持10s，无操作后自动退出]

step2. 设置主机地址

按Call键设置主机地址，每按一次切换一个地址；

设置过程中会通过”BP”音提示地址；

step3. 保存&退出

1. 设置后，无操作10s内自动保存并退出；

2. 设置后，室外机断电自动保存并退出；

...

设置操作

...

提示音

...

指示灯

...

进入设置状态

...

响九次BP音

...

双闪

...

Step1. Enter the setup state

Within 10 seconds after power-on, press and hold the Call key until the "BP" sound is heard for 9 times and then release it (the "BP" sound will be heard once per second) to enter the DS address setting state, and the indicator light will flush ” off,on / off,on/ off,on”, there is an interval of 1s, and repeat flush.

[This state is maintained for 10 seconds, and automatically exits after 10 seconds of no operation]

Step2. Set the address

Press the Call key to set the DS address, and switch one address each time; The address will be prompted by the "BP" sound in the setting process;

Step3. Save & Exit

After setting, automatically save and exit within 10s without operation

or the outdoor unit will automatically save and exit when the power is off;

...