图例1
图例2
需求设备：
DT821/VD: new upgraded firmware, version
DT821/T5: new upgraded firmware, version
BDU-V2: new upgraded firmware, version
2 wire monitor
升级点：
VD免配置，升级后可实现自动兼容BDU router以及normal模式
...
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Note |
|---|
|
New Settings in T5 Modular
Expand System
The default mode is Normal, which supports 32-users. when more than 32-users, we need first change the mode to Expand. (BDU is Router mode as default in new version, no need additional settings.)
IM setting （New menu)
(1~8) 8 zones represent the BDUs
The first BDU is available as default
(001~032) 32 zones represent the IMs
IMs in the first BDU is available as default
Click the icon on the right according to the actual project conditions to enable the corresponding BDU or IM.
Each zones can enter to via a simple touch for more pages.
The button on the left at the bottom is used to search for the online status of the enabled BDUs/IMs, which will be marked with a new icon after refreshing.
Call setting ( Keypad call)
Default calling number for each monitor
The digits which belongs to each monitor to call are all fixed, no need reconfigured.
For example, if there are only 20pcs monitors in the first BDU, the first monitor under the second BDU is still called by the number 33 , not 21
Customize the calling number for each monitor
customized calling number can be set in each monitor via T5 modular menu above, one by one,
Note that the number must not be repeated.
customized calling number can be set in the computer via the TXT. file above, and then update it to T5 modular by SD card.
Note that there is a one-to-one correspondence between the sample field and the part to be filled in below. LOCAL corresponds to the customize calling number and cannot be repeated.
If need to hold both the room number address call and the Local_Nbr call, noted the following:
”Use Local_Nbr to call only”: set to Disable
Local_Nbr: Can be any number and letter except 1-256
Call setting ( Namelist call)
| Info |
|---|
one is to display only name, and the other is to display room number + name
|