IX-RLC has 3 main functions:
Main controller of the lift control. See details on: 21. IX-RLC as Lift Controller Main Module
Lock actuator.
Offline time server.
This article mainly for function 2 and 3.
| Table of Contents | ||||
|---|---|---|---|---|
|
...
Connectors and Indicators:
...
Micro USB and Update key: use for firmware update.
...
Lock1: lock1 terminal. As below
...
Lock connections
You could connect only lock1 or lock2 with inner 12V, the reset must be dry contact.
...
...
System Connections
Connected to same network with IX devices:
...
...
Setup to work with IX850
On the door station (IX850) needs to work with IX-RLC as lock actuator.
While the IX850 in installer mode,
Tap “Installer mode” “Installer mode” -> “settings” “settings” -> “Parameter” “Parameter” -> “Lock “Lock and PWD”PWD”, settings below are related with IX-RLC.
...
After setup the parameters, unlock the door station via monitor to apply changes (or restart the IX-RLC)!
...
DIP address setup of IX-RLC
To setup to works with IX-RLC, setup as below:
...
Address is the IX-RLC’s address needs to work with this door station.
DIP Address |  |  |   |  |
IX-RLC’s Lock1 Address | 0099920101 | 0099920102 | 0099920103 | 0099920104 |
IX-RLC’s Lock2 Address | 00999201011 | 00999201021 | 00999201031 | 00999201041 |
...
Lock 2 external address: 009999201011
...
Set IX-RLC as offline time server.
Because IX-RLC can “run” the time, and then “pass” to all items in the same IP system.
We could use IP monitor IX471IX471S/IX439IX482, or use door station IX850, to configure IX-RLC remotely.
Way 1 (TD setup by IX monitor remotely)
Step 1, use IX471 IX471S to enter setup pages of IX-RLC
tap screen of IX471 IX471S to enter HOME page -> “Settings” -> >” Installer “->“Onsite tool “-> input password (66666666 by default), and tap ”OK” ”OK” -> touch 🔍 ->“Start search” -> on the list, choose “IM 9201 IXRLC…”
Step 2, set IX-RLC as STATIC IP, and write down the static IP address
(After step 1) -> “Parameter” -> >” Network setting”-> tap “IP policy” “IP policy” and choose “STATIC”“STATIC”
-> Write down the existing static IP address (PS: this static IP address allow to be changed), will use in step 5
...
Step 3, go back to the HOME page of IX471 IX471S -> tap icon “INFO” -> Write down the IP address of IX471IX471S, will use in step 4
Step 4, use IX471 IX471S as transitional time server, in this way to “transfer” the time/date to the IX-RLC via monitor
go back to the HOME page of IX471 IX471S -> “Settings”-> “General” -> “Date and time”, to set the present time and date
-> Internet time -> tap “Time server”“Time server”, then change it to the IP address of IX471 IX471S (see this IP address in step 3)
-> Then tap “Time update” to “pass” “Time update” to “pass” the time/date to the IX-RLC
Step 5 (the last step), to get rid of transitional time server IX471IX471S, now we use IX-RLC as permanent time server
Tap “Time server” “Time server” again, then change it to the IP address of IX-RLC (see this IP address on step 2)
-> At last, tap “Time update” to “pass” “Time update” to “pass” the time/date to all items in the same IP system
Way 2 (TD setup by IX850 remotely)
Step 1, use IX850 to enter setup pages of IX-RLC
On main screen of IX850, press “KEY” “KEY” button -> input code “990166666666”, then press “OK” “OK” to enter Installer Mode (now you can see the top bar of screen turn to BLUE) -> press this BLUE BAR -> “Search online” “Search online” -> on the list, choose “IM 9201 IXRLC…”
Step 2, set IX-RLC as STATIC IP, and write down the static IP address
(After step 1) -> Parameter -> Network setting
-> tap “IP policy” “IP policy” and choose “STATIC”“STATIC”
-> Write down the existing static IP address (PS: this static IP address allow to be changed), will use in step 5
...
Step 3, go back to the HOME page of IX850 -> tap the leftmost of BLUE BAR, to enter quick menu -> tap icon “INFO” “INFO” -> Write down the IP address of IX850, will use in step 4
...
go back to the HOME page of IX850 -> tap BLUE BAR -> “Settings” -> “General”-> “Date and time”, to set the present time and date
-> Internet time -> tap “Time server”“Time server”, then change it to the IP address of IX850 (see this IP address in step 3)
-> Then tap “Time update” to “pass” “Time update” to “pass” the time/date to the IX-RLC
Step 5 (the last step), to get rid of transitional time server IX850, now we use IX-RLC as permanent time server
Tap “Time server” “Time server” again, then change it to the IP address of IX-RLC (see this IP address on step 2)
-> At last, tap “Time update” to “pass” “Time update” to “pass” the time/date to all items in the same IP system
...
Restore factory setting
Toggle back and forth DIP2 quickly (five times totally), and then power LED will flash (that means IX-RLC is restoring). At last power LED will be stable on (that means restore is finished)
...