| Table of Contents |
|---|
Preparation
Select the appropriate IP camera to access the system on demand. And set parameters for the IP camera.
Video Codec
An Onvif IP camera could be added to IP monitor IX471S, as long as this IPC could support following video codec: H264B、H264、H264H、H265、H265+
| Note |
|---|
MJEPG decoding is not supported Some IPC can support both audio and video streams, please select video stream |
Preset the IP Camera before establishing a connection to the IX monitor
| Info |
|---|
The setting interface of each IP camera brand are different. Please set the following items according to the actual situation |
Network
Choose to set DHCP or STATIC depending on the system
Video
| Info |
|---|
Each stream type need to do setting separately |
| Main Stream (Full screen) | Sub Stream ( Quad-view) | Tri-Stream ( App view) |
|---|---|---|---|
Encoding | H264 or H265, MJPEG is not support | ||
Resolution | 1280*720 | 640*480 | 320*240 |
FPS( Frames per second) | acceptable setting range: 15 ~ 18, 15 is the Best recommendation | ||
Bit Rate | 700~1024kbs | 512kbs~640kbs | 512kbs~640kbs |
BitRate Control | CBR is the Best recommendation | ||
Add IP Camera to IX471S on site
1. Select the correct menu according to the actual situation
How to chose IPC or WLAN IPC when add camera to monitor
It depends on how the monitor is connected to the router where the IPC is located.
If it is wireless connected to PoE or Router which IPC attached , select WLAN IPC camera to add.
If it is wired connected to PoE or Router which IPC attached , select IPC camera
see below samples:
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
2. Add by search or manual
3. Login
input User name & PWD
4. Save
Delete IP camera
main menu → Settings → Ext.Unit → IPC camera / Wlan IPC camera → chose → Delete
Synchronize
You could manually add IP cameras by the same steps to others or synchronize the current IP camera list to other devices in the same network.
main menu → Settings → Ext.Unit → IPC camera / Wlan IPC camera → Sync to/Sync from
