Add, check and delete access cards on IX
Card attributes and notices
Attributes
To have a better index while managing cards, each card’s attributes as below:
Card ID: 10digits unique number for card, usually marks on cards.
Room_Addr: Identity which room the card belongs to. (If RM_Nbr = 0000 means is a public card no belongs)
Name: The card’s name, different from the “Name” for a monitor.
Date: Create the Date of the card.
Notices
Each building’s (BD_Nbr) card storage in the door station.
Cards could only release door lock 1.
Manage cards in SS scenario
This chapter are applied only with below condition.
In SS scenario, for only 1 building.
With only one door station, no card sync between different doors requires
Cards manage on IX821 could only done with monitor.
Manage via door station IX850
| Note |
|---|
Make sure the door station’s BD_Nbr is correct before managing cards. Not allow change BD_Nbr after adding cards. (cards won’t work if change BD_Nbr for the door station after cards added) |
Add cards
In “Manage menu”: “Access Cards” -> “Add”
...
Tap “Save” to add the card. unless “Save” been tap, IX850 will not apply changes.
View and Delete Cards
In access card menu, tap “View” to check current cards.
...
Card/cards search result as below:
...
Manage via monitor IX471/IX439
Cards manage via monitor is remotely configure database on door station.
Access card information stored in the door station with same BD_Nbr and DS_Nbr = 1.
Add Cards
On monitor, “Settings” -> “Card manage” -> “Add one card”
...
Tap “Save” to apply changes.
View and Delete card
In “Card Manage”:
“Card list” to list all cards, tap to check details or delete.
“Delete all” delete all cards relate to this Room_Addr
Synchronize Access Card
Cards databases synchronize only requires when:
...
Sync from device: Sync database from door station with same BD_Nbr.
Backup, restore and clean card database
Manage menu: “Access Cards” -> “Card data”
...